|
|
Product Details:
|
| Core Size (HxWxT): | 700 X 760 X 65 Mm | Core Material: | Hybrid: Aluminum Fin + Copper Tube |
|---|---|---|---|
| Tube Material: | Seamless Copper Tube (0.35mm Wall) | Fin Material: | Aluminum Alloy 3003 (0.10mm) |
| Fin Type: | Louvered Plate Fin | Fin Density: | 9-10 FPI |
| Row Configuration: | 4-Row | Working Pressure: | 0.5 MPa (rated) |
| Heat Dissipation: | 80-90 KW At Rated Airflow | Inlet Diameter: | 45 Mm |
| Outlet Diameter: | 45 Mm | Tank Material: | High-Strength Nylon PA66-GF30 |
| OEM Reference: | 11NB-40520, 11NB-40530, 11NB-40540 | Compatible Models: | Hyundai R220LC-9, R250LC-9, R290LC-9, R220LC-9S |
| Highlight: | Aluminum Copper Dual Core Radiator,Heavy-Duty Excavator Cooling Hyundai,Hybrid Material Construction Radiator |
||
Fleet managers selecting replacement radiators for Hyundai R220LC-9, R250LC-9, and R290LC-9 excavators face a persistent dilemma: all-aluminum radiators provide excellent heat transfer but are vulnerable to vibration-induced tube cracking at header joints, while all-copper-brass radiators offer superior durability but at 30-40% higher cost and marginally lower thermal efficiency. This forces a choice between frequent replacement (aluminum) or higher upfront investment (copper-brass), with neither option being fully optimal. In practice, many operators choose the cheaper aluminum option and accept the resulting reliability risk, only to encounter unexpected failures during critical project phases.
The underlying physics are straightforward: aluminum (thermal conductivity ~205 W/mK) is an excellent heat conductor but has lower fatigue strength (~55 MPa at 10⁷ cycles) and is susceptible to stress-corrosion cracking at grain boundaries. Copper (thermal conductivity ~385 W/mK) has even better conductivity and far superior fatigue resistance (~90 MPa at 10⁷ cycles), but is 3.3x denser (8.96 vs 2.70 g/cm³) and more expensive as a raw material. Standard radiators use one material throughout, inheriting both the advantages and disadvantages. The tube material primarily determines structural durability, while the fin material drives thermal performance – but standard construction uses the same material for both, creating the trade-off.
The WNRLN ER-ALC-006 radiator solves this by applying each material where its properties are most beneficial. Seamless round copper tubes (0.35mm wall thickness, optimized for structural integrity and burst strength) form the coolant-carrying core structure that must withstand pressure and vibration. Aluminum alloy 3003 louvered fins (0.10mm thickness) provide the air-side heat transfer surface – aluminum's lower density allows more fin surface area per unit weight, and its excellent thermal conductivity maximizes heat rejection to airflow. The 4-row hybrid core delivers 80-90 kW heat dissipation at rated airflow – competitive with all-aluminum designs while providing 2x the fatigue life of aluminum tube construction. The copper tubes are mechanically expanded into brass headers and brazed for a leak-proof metallic joint, while aluminum fins are bonded through a controlled-atmosphere brazing process using a zinc-aluminum filler that prevents galvanic corrosion at the copper-aluminum interface. This targeted material optimization provides the best of both worlds: aluminum's fin efficiency with copper's tube durability, at approximately 15-20% less cost than all-copper-brass.
Engineered for Hyundai R220LC-9, R250LC-9, R290LC-9, and R220LC-9S models (OEM reference: 11NB-40520, 11NB-40530). Direct replacement fit. Ideal for operators who need better-than-aluminum durability without the full premium of all-copper-brass construction.
Hot coolant enters the top tank and flows through the 4-row copper tube bundle. Copper's superior thermal conductivity (385 W/mK) rapidly transfers heat through the tube wall into the bonded aluminum fins. The louvered aluminum fins provide a large, aerodynamically optimized surface area (9-10 FPI) for convective heat transfer to the fan-driven airflow. At the copper-aluminum fin interface, a carefully controlled zinc-aluminum brazing filler prevents galvanic corrosion by creating a sacrificial layer and eliminating direct electrolyte paths. The copper tube headers are brazed to brass tank plates, then the nylon tanks are gasket-crimped in the standard configuration. The result is a radiator that combines the reliable tube integrity of copper with the efficient heat rejection of aluminum fins.
A: No. We use a proprietary zinc-aluminum brazing filler at the copper-aluminum interface that creates a graded transition zone preventing galvanic corrosion. This interface has been validated through 500+ hours of accelerated corrosion testing (salt spray + thermal cycling) with no evidence of galvanic attack.
A: The hybrid ER-ALC series typically costs 20-30% more than all-aluminum radiators but 15-25% less than all-copper-brass. For operators keeping machines 3+ years, the durability improvement over all-aluminum typically provides net savings through reduced replacement frequency.
A: Copper tubes can be field-repaired by soldering like traditional copper-brass radiators. Aluminum fins should not be soldered. For significant damage, we recommend replacement. The hybrid design offers the repairability of copper tubes with the thermal efficiency of aluminum fins.
A: Yes, approximately 25-30% heavier due to the copper tube mass. For the Hyundai R220-290 series, the weight increase is approximately 8-12 kg, which does not affect machine stability or performance.
Contact Person: Ms. Felicia Zhou
Tel: +86 17873657316